home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Your Choice 3
/
Your Choice Software Collection 3.iso
/
dos
/
utils15
/
moveall.doc
< prev
next >
Wrap
Text File
|
1994-10-05
|
9KB
|
222 lines
░▒▓█ MoveALL █▓▒░
Please register, see the REGISTER.NOW file.
────────────────────────────────────────────────────────────────────────────────
Getting started:
Move or copy (install) the MoveALL.exe file to your hard drive.
For example you can copy MoveALL.exe to C:\DOS (copy a:\moveall.exe c:\dos)
that way it should be in the PATH of your computer which allows you to
type and use MoveALL from anywhere on your computer even on other drives.
If you've registered then use my Install program to install to your
hard drive. Follow the instructions below...
Type "A:" or "B:" (press ENTER) then "INSTALL" and pick what you want to
install, the installation program will then allow you to change the default
location of where to install.
────────────────────────────────────────────────────────────────────────────────
Help Info:
MoveALL Copyright (C) 1993-1994 by Deric Benesch
MoveALL will move directories/files you specify. It will prompt you when a
disk runs out of memory and allow you to change it without having to quit.
You can stop at any time by pressing any key and when prompted press [ESC].
It also renames file and directory names if they are located on the same
drive for increased speed.
You can rename a directory by entering the directory name you wish to change
and the name you want it changed to. For example if you want to change a
directory called MYDIR to a directory called ITSMINE simply type:
MOVEALL MYDIR ITSMINE
MOVEALL Source PATH or /C Destination PATH [/F] [/G] [/S] [/R] [/V] [/D]
Source PATH - You must include this parameter. This is where the files/
directories you want to move are located.
/C - Tells MoveALL that the source files/directories are in the
Current directory.
Destination PATH - You must include this parameter. This is where you
want to move the source files/directories to.
/F - MoveALL will prompt you to confirm each File before it is moved.
/G - MoveALL will prompt you before Going into a directory allowing
you to skip it if you want.
/S - MoveALL will make Subdirectories in the destination
directory/drive unless you use this parameter. It will move all
files to the destination without creating subdirectories instead.
/R - MoveALL will Replace existing files unless you use this parameter.
/V - Turns disk-write Verification on to ensure that new files are
written correctly.
/D - MoveALL will NOT try to remove Directories.
────────────────────────────────────────────────────────────────────────────────
Examples:
To move files from a 1.2M 5¼" drive B: to a 1.44M 3½" drive A: type:
C:\>MoveALL B:\ A:\
^^^^ ^^^ ^^^
Don't |Source|Destination
type "C:\>"
it's the prompt.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you want to move files from "C:\STUFF" and its subdirectories to
"C:\TEMP" but do not want MoveALL to make the subdirectories in "C:\TEMP"
then type:
C:\>MoveALL STUFF TEMP /D
^^^^ ^^^^^ ^^^^ ^^
Prompt | Source |Destination|Don't make subDirectories
If "C:\TEMP" does not exist MoveALL will rename "C:\STUFF" to "C:\TEMP"
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NOTE: MoveALL is NOT CASE SENSITIVE so you can type "stuff", "STUFF",
"Stuff", ect, ect.
It also does not matter how many spaces are between parameters so
long as there is AT LEAST ONE space.
────────────────────────────────────────────────────────────────────────────────
What you get when you register:
When you register you will be able to move groups of files...
MoveALL C:\*.WAV C:\WAVS /D
^^^^^
Registered only.
like *.WAV files from anywhere on your hard disk and collect them in one
directory. The "/D" tells MoveALL not to make subdirectories in C:\WAVS.
You can also rename files "on-the-fly":
MoveALL \BP\*.EXE \TEMP\*.WOW
^^^^^ ^^^^^
Move "*.EXE"s from "\BP"| To "\TEMP" and rename to "*.WOW"s
────────────────────────────────────────────────────────────────────────────────
Error code list:
Error Number│Error Message
════════════╪═════════════════════════════════
1 │Invalid function number
Normal » 2 │File not found
Normal » 3 │Path not found
Increase "FILES=" » 4 │Too many open files
Read only files » 5 │File access denied
Shouldn't happen » 6 │Invalid file handle
Shouldn't happen » 12 │Invalid file access code
15 │Invalid drive number
Normal » 16 │Cannot remove current directory
Shouldn't happen » 17 │Cannot rename across drives
18 │No more files
100 │Disk read error
101 │Disk write error
102 │File not assigned
103 │File not open
104 │File not open for input
105 │File not open for output
106 │Invalid numeric format
Change tab on » 150 │Disk is write-protected
floppy disk. 151 │Bad drive request struct length
Floppy drives » 152 │Drive not ready
154 │CRC error in data
156 │Disk seek error
157 │Unknown media type
Need new disk » 158 │Sector Not Found
159 │Printer out of paper
Printer not » 160 │Device write fault
connected. 161 │Device read fault
Sometimes network» 162 │Hardware failure
causes this,norm. 200 │Division by zero
201 │Range check error
May happen since » 202 │Stack overflow error
program 203 │Heap overflow error
uses recursion 204 │Invalid pointer operation
but can't be 205 │Floating point overflow
fixed easily. 206 │Floating point underflow
207 │Invalid floating point operation
208 │Overlay manager not installed
209 │Overlay file read error
210 │Object not initialized
211 │Call to abstract method
212 │Stream registration error
213 │Collection index out of range
214 │Collection overflow error
215 │Arithmetic overflow error
Won't happen yet» 216 │General Protection fault
────────────────────────────────────────────────────────────────────────────────
Get Deric's latest releases from:
░▒▓█ Software Creations BBS █▓▒░
1200/2400 V.42/MNP Lines : (508) 365-2359
2400-14.4k HST US Robotics Lines : (508) 368-7036
2400-16.8k V.32/V.42bis US Robotics lines : (508) 368-7139
14.4-28.8k V.32/V.42bis/V.fc Hayes Optima lines: (508) 365-9352
14.4-28.8k V.32/V.42bis/V.32terbo/V.fc US Robotics lines: (508) 368-3424
» "Home of the Authors" «
* Software Creations Voted #1 BBS for 1993 *
"There's no place like home!"
For tech support or suggestions you can leave me a message on
Software Creations BBS.
At the main board leave a message to
"DERIC BENESCH" and I will get back to you A.S.A.P.
────────────────────────────────────────────────────────────────────────────────
Keep a look out for Deric's Super Dos Shell
It will have all the features of the registered versions of my util
programs as well as a file (HEX and ASCII) editor and a text editor
along with print features. Most importantly it will allow you to move
around your computer and load up programs quickly without using up
a lot of base memory (only uses 6K).
It has full mouse support and you can configure everything including
its colors.
Other Utils to look for:
CopyALL - Copies whole drives/directories FAST!
SuperDel - Deletes whole drives/directories REAL FAST!
Encrypt - Encrypt/Decrypt your favorite files!